The maximum span and or coverage from the centre of one post to the next are 1600mm.
To work out your requirements divide the running length (straight run without breaks, if you have more breaks again measure then length) of your balustrade by 1600mm to work out the amount of kits you will need. (You will need a starter end kit for each run and then followed by additional kits)
For example if the overall length of your balustrade run is 10m you would divide 10m by 1.600 = 7 (rounded up) kits. This would be broken down as follows
1: No – Starter end kit
6: No–Additional kit
If you are carrying out a balustrade installation project we recommend that you call our technical and estimating team for advise on 0800 799 9082 and forward a drawing to assist.
Tip - It may be a good idea to add between 5 and 10% extra materials on your project to allow for waste and/or measurement errors.